Oregon DMV Motorcycle Permit Practice Test 2025

The increased weight and change in gravity that comes with a passenger will increase the braking distance. If you are carrying a passenger, increase the following distance to account for the increase in braking distance.

You must determine a safe speed for the curve beforehand, and slow down accordingly. Consider the road quality, the sharpness of the curve, and the weather condition on approach. Remember that braking in a curve may cause your motorcycle to skid.

It can be more dangerous if something is wrong with your motorcycle than if something is wrong with your car. A small problem with a motorcycle can result in an accident. Motorcycles require more frequent attention than a car to ensure everything from tires, fluids, lights, etc. to the chain or belt is in a good condition.

The term often refers to motorists slowing down with the intent to look at a crash scene. It can be the cause of traffic jams and collisions as the driver is distracted. The safest thing you can do when riding past an accident is to focus on the road ahead of you.

Center turn lanes are there to ease left turns for vehicles from both directions. Don’t use it for passing!

At night, you need to reduce your speed until you have enough time to react and swerve if you notice objects on the road.

Alcohol and drugs will have an immediate impact your driving ability, but emotions can also affect your driving. They will distract you and change the way you react. If you are experiencing turbulent emotions, you should ask yourself if you can safely ride before riding your motorcycle.

Always make it as easy as possible for other drivers to merge. When approaching an acceleration lane, you should either change lanes or leave a large-enough gap in front of your vehicle for traffic to merge into.

A catalytic converter is a device that helps reduce the toxic and polluting exhaust emissions from the engine. If your motorcycle is equipped with a catalytic converter, keep in mind that leaded or lead-replacement petrol can damage the system.

It is extremely important that motorcycle riders signal properly as they are already vulnerable in traffic and more likely to be in an accident compared to car drivers. Signaling reduces confusion, will help traffic know of your intentions, and will make you easier to see. Use them anytime you plan to change lanes or turn.

Visibility is more critical for a motorcyclist than a vehicle driver. Motorcyclists passing another vehicle should be especially alert that they ride through the blind spot as quickly as possible. Remember that you are not permitted to exceed the posted speed limit.

After re-fitting a wheel, make sure the wheels are aligned. Incorrect wheel alignment will lead to excessive wear and poor handling.

Riding with child passengers requires proper precautions. Your motorcycle must be equipped with passengers footrests that the child's feet can reach. Do not ride if the child's feet cannot reach them.

Dragging the rear brake is done to control the speed of the bike and to maintain stability, especially in corners or turns. Do not use the front brake in this way as it could tip the bike over.

Provide instructions about how the passenger should behave to all passenger, even if your passenger is a motorcycle rider. The instructions should include; get on after you have started the engine, keep both feet on the footrests (even when stopped), sit as far forward as possible without hindering your movement, hold on firmly, lean as you lean in curves and look over your shoulder in the direction of the turn, etc.

Riding within the friction zone can give you additional control through turns, such as when making a U-turn.

Riders with less than six months experience account for almost half of all collisions - so be extremely careful during your first couple of months. With experience, you'll know how to handle situations far better and understand your limitations.

Keep the headlights and running lights on at all times, even during the day. Studies have shown that a motorcycle with its lights on is two times as likely to be noticed compared to when the lights are off.

Don’t increase your speed while being passed. If possible, you should keep to the right and leave space in front of your motorcycle so the other driver can return to the right lane after passing.

You must, in all situations, warn other drivers of your intentions. Use hand signals if your vehicle’s signals stop working or if it’s difficult to see your turn signals.